action craft

Addictive Fishing Forum

Home

Members

Calendar

Who's On

Welcome Guest ( Login | Register )

action craft

Rate Topic

Display Mode

Topic Options

Author

Message

redfish81012

Posted 7/29/2006 12:50 PM

Forum Guru

Group: Forum Members
Last Login: 6/9/2008 4:24 PM
Posts: 70, Visits: 1,496

I was just wondering if anybody is having a problem with the 1720 flyfisher mine is purposing really bad when i run about 4000 rpms and trim out just a little bit also is anyone having problems with the paint chipping off the polling platform.

Thanks

Post #4515

FishinFool

Posted 8/2/2006 2:06 PM

Junior Member

Group: Forum Members
Last Login: 10/26/2006 5:33 PM
Posts: 14, Visits: 34

i just recently purchased a 2006 1720 flyfisher and am having no problems with any of that stuff.maybe try running your boat with the trim tabs up one time and see what that does ours didnt porpoise at all when we were running with them up and we were running at about the same RPMs .also i havent noticed any paint chipping on the platform.my best advice is to call the people at action craft and let them know.good luck!!

Post #4669

skipper

Posted 8/30/2006 7:28 AM

Forum Newbie

Group: Forum Members
Last Login: 2/2/2008 5:07 PM
Posts: 5, Visits: 10

I used to own a Flyfisher 1720. I have since traded for a Pathfinder 2200. Make sure that your engine is trimmed all the way down. If it is not, this will cause the condition that you describe. If this is not the problem, trim tabs should fix it.

Post #5756

fisherman292

Posted 9/10/2006 4:32 PM

Supreme Being

Group: Forum Members
Last Login: 8/10/2008 6:02 PM
Posts: 294, Visits: 546

I just got an 182 action craft and when I am running and I slow down with the engine still trimmed up it will porpoise. Try trimming the engine and messing with it.... good luck

Myspace.com/bruteimpulse

Aim: bruteimpulse

Post #6127

« Prev Topic | Next Topic »

All times are GMT -8:00, Time now is 11:35pm

Web Design by Gecko Media